-DC V: 6.000/60.00/600.0/1000V (auto range)
±0.5%rdg ±3dgt (6/60/600V)
±0.8%rdg ±3dgt (1000V)

-DC mV: 600.0mV
±1.5%rdg ±3dgt

-DC Clamp Sensor: 60.00/200.0A (auto range)
±1.5%rdg ±3dgt + Sensor accuracy

-AC V: 6.000/60.00/600.0/1000V (auto range)
±1.0%rdg ±3dgt [40 - 500Hz] (6/60/600V)
±1.3%rdg ±3dgt [40 - 500Hz] (1000V)

-AC mV: 600.0mV
±2.0%rdg ±3dgt [40 - 500Hz]

-AC Clamp Sensor: 60.00/200.0A (auto range)
±2.0%rdg ±3dgt + Sensor accuracy [40 - 500Hz]

-Ω: 600.0Ω/6.000/60.00/600.0kΩ/6.000/40.00MΩ (auto range)
±0.5%rdg ±4dgt (600Ω)
±0.5%rdg ±2dgt (6/60/600kΩ/6MΩ)
±1.5%rdg ±3dgt (40MΩ)

-Continuity buzzer: 600Ω (Buzzer sounds below 90Ω)

-Diode test: Open-loop voltage: < 3.0V

-Capacitance: 60.00/600.0nF/6.000/60.00/600.0/1000µF
±2.0%rdg ±5dgt (60/600nF)
±5.0%rdg ±5dgt (6/60/600/1000µF)

-Frequency: 99.99/999.9Hz/9.999/99.99kHz ±0.1%rdg ±3dgt

-DUTY: 10.0 - 90.0% ±1.0%rdg ±3dgt [50/60Hz]

-Applicable standards: IEC 61010-1 CAT IV 300V / CAT III 600V / CAT II 1000V
IEC 61010-2-033, IEC 61010-031, IEC 61326-2-2 (EMC), EN 50581 (RoHS)

-Power source: R03 (1.5V) × 2

-Dimensions: 155(L) × 75(W) × 40(D)mm

-Weight: 250g Approx. (including batteries)

-Included Accessories: Wing-type holder
7066A (Test leads)
R03 × 2, Instruction manual

-Optional Accessories: 7234 (Alligator clips)
8161 (AC Clamp sensor)
8115 (AC/DC Clamp sensor)
9189 (Magnet hanger strap)